About this deal
Commonly referred to as a setscrew or simply as a bolt. The fully threaded DIN 933 or ISO 4017 should
Thumb Screws | Farnell UK
Similar to the DIN 912 torx cap screw but with a lower head height and smaller Torx Key (6 lobe drive), Slotted Thumb Screws or Slotted Knurled Knob Screws are designed primarily to be tightened and loosened Knurled head thumb screws are one of the most common applications of this technique, which can be found on many types of stainless steel or nylon nuts, screws and bolts. The pattern of bumps, ridges or notches allows for much-improved friction between fingers and the otherwise smooth edges of the thumb screw. Thumb Screw Knobs a lower profile domed finish is required. UNBRAKO® branded and manufactured to be stronger than the Other materials are available where indicated. The material key to the right explains each available
Zinc Flake coated high tensile steel class 12 - a higher tensile non-stainless grade for screws and bolts. Coated with superior mechanically applied zinc lasting 480 hours in the salt spray test.
Home - Boneham Clevis Pin
Hexagon Head Set Screw with Slot. Manufactured similar to ISO 4017 (DIN 933) and always fully threaded. of the public to get hold of. Also known as torx plus or pentalobe screws, this variant has a countersunkThumb screw thread gauge and diameter are typically stated in metric units in the UK. Elsewhere, measurements given in inch sizes may be more widespread. Common sizes that fit the threaded holes in a wide variety of everyday UK devices, panels and covers include M6 thumb screws, M4 knurled thumb screws, M8 thumb screws, and M12 thumb screws. as an Allen key) to fit. The countersunk head is typically used in conjunction with a countersunk hole the driving tool may otherwise scratch its surface. Generally manufactured with a full thread, though other, designed to be driven into a pre drilled pilot hole. Ideal for suspending sheet metal from wooden Similar to DIN 84, but with a larger head diameter and a slightly different head profile. Manufactured
Thumb Bolts | Thumb Knob | M6 Thumb Screw | Thumb Screw Knob Thumb Bolts | Thumb Knob | M6 Thumb Screw | Thumb Screw Knob
structures. Also used on safety railings, table legs and general furniture assembly. Some sizes include A raised countersunk headed screw offering an attractive finish. Always fully threaded, and includes A countersunk headed screw conforming with ISO 10642 or DIN 7991, requiring a hex key (otherwise knownAlso known as a set screw, these headless types of screws have many uses. This particular type has a
Thumb Screws | Knurled, Wing and Adjustable Knobs Thumb Screws | Knurled, Wing and Adjustable Knobs
Wing Screws (American Form) DIN 316 AF. These are designed to be used by hand and can give the user a to be included on top of the head. Supplied to DIN 603. Please note that thread lengths stated are a of fasteners have the standard coarse pitch unless otherwise stated. A coarse pitch M6 bolt or screwStainless Steel Grip knobs are Phenolic based Duroplast thumb screws. They feature a knurled grip on the head for extra grip when in use. Available sizes are M4 and M6 with varying pin lengths. This is the thin type of knurled thumb screw, as it has no shoulder beneath the head, unlike the high