Stanley Proto J1332AVP Antivibe Ball Pein Hammer, 32-Ounce

Product Information

You don't have permission to access "http://www.homedepot.com/p/Stanley-FATMAX-28oz-16-in-AntiVibe-Framing-Hammer-with-Rubber-Grip-Handle-51-169/203772615" on this server. But that's not the only benefit of this hammer; it also has a face that's significantly larger than most other similar hammers, meaning you are far less likely to have a swing-and-miss, and thus less likely to strike your thumb instead of the nail, or damage the wall with a misplaced blow. And since it's made from a single length of forged steel, it's a tool that should last you for many decades of dependable use.

Proto® AntiVibe® Steel Ball Pein Hammers | PROTO

If possible, it's advised to use a nail gun to secure baseboards, but if you don't have a nail gun available, then a hammer will work. There are specialized hammers known as "trim" and "finish" hammers designed for this job. You’ll find claw hammers weighing as little as 8 ounces and monsters weighing as much as 32 ounces, but for the average DIYer, a tool that’s between 16 and 20 ounces is best. Go toward the bottom of that range if you’ll mostly use the hammer for hanging pictures and similar light tasks, and toward the upper end of the range if you’ll be doing framing or similar construction activities.The tubular steel handle of the hammer is designed to shift the balance of the weight toward the head, increasing the power of each blow. The soft, rubber grip will also keep the hammer comfortably planted in your hands while you swing and strike. A chrome finish helps prevent rust and corrosion. This drywall hammer from Goldblatt is a long-lasting and affordable tool that’s designed for installing drywall. The tool is well-balanced for a steady swing and comes wrapped in an ergonomic handle that minimizes impact vibrations. Additionally, this hammer has a hatchet-like end that’s great for making adjustments to the drywall. Key Features A drywall hammer’s weight affects its power and maneuverability. Light hammers allow for a controlled swing, but they often cannot effectively drive drywall nails. Heavy drywall hammers are difficult to control, but they can provide an adequate amount of strength to cut through drywall. Cost Built with a strong polyester fiber handle and a long-lasting titanium head, this drywall hammer is a high-quality and durable drywall tool. While increasing power, the nine-ounce titanium head reduces weight and recoil compared to traditional steel heads. Additionally, the hammer’s hatchet end has a thumb divot for increased grip and control. Key Features

AntiVibe Framing Hammer with Stanley FATMAX 28oz. 16 in. AntiVibe Framing Hammer with

The joint where the fiberglass handle and steel head meet is reinforced to provide even more durability and strength to this well-balanced hammer. It's very reasonably priced, too. Whether you use it for carpentry, construction, or hanging a mirror, this is a tool that will serve you well for many years.For most general projects, a 12-to-16-ounce hammer is sufficient. But for heavier tasks, such as driving large nails into hard wood, framing, or construction, you'll want a heavier hammer with an equally heavier strike force. That's when you'll appreciate this 20-ounce general-purpose hammer from Craftsman, which has a very slightly curved rip claw, a smooth face, and a fiberglass handle with a rubberized molded grip for extra stability. Rubber Mallet: Shaped much like a club hammer, but with a rubber head instead of metal, mallets are not used to drive nails but to add some force when driving stakes or chisels, building furniture, working with upholstery, or similar tasks where you need more power than your hands provide alone, yet you don’t want to damage the surface upon which you are working. Ball Peen: The head of this hammer has a flat face on one side and a round, somewhat ball-shaped face on the other. There is no claw. Ball peen hammers are mostly used for metalwork. Rip hammers, more properly called framing hammers, have a fairly straight claw, which can be used to rip apart nailed boards. Rip hammers are often heavier than claw hammers, but they come in a wide range of weights and sizes.

Stanley FatMax Anti-Vibe Club Hammer 3lb (1.4kg) - Screwfix

Drywall hammers are useful for homeowners looking for help on serious DIY projects. Here are a few factors to consider before buying a drywall hammer. HandleLonger isn’t always better. While a longer hammer lets you build up more momentum for a more powerful blow, such a tool weighs more than its shorter counterparts and is generally not necessary for the average DIYer. If you don't expect to use your hammer for professional or heavy-duty DIY jobs, then there's no reason to spend money on a professional-level tool. Not when you can buy this sturdy 16-ounce framing hammer with a steel head, fiberglass handle, and very slightly curved rip claw for pulling apart nailed boards. Unlike many framing hammers, this one has a smooth face, which is slightly more forgiving, should you mis-swing and hit the wall instead of the nail. The IIT 12-Ounce Stubby Hammer is meant for light-duty projects. The lightweight, ergonomic handle is covered in a soft rubber comfort grip that will work for both right- and left-handed individuals, and its stubby size makes this tool ideal for working in confined quarters or carrying out around-the-house repairs and simple carpentry tasks. Drywall hammers are used by serious DIYers to install drywall. The hammer includes a hatchet and a milled front face that help users drive nails into drywall without damaging its surface. Why do drywall hammers have a hatchet?